Sunday Classic / DIY Fly Line Loop with Step-by-Step Instructions

6 comments / Posted on / by

DSC_8113

By Kent Klewein

Most fly lines these days already come with welded loops at the ends for the easy attachment of backing and leaders.

If you fish as much as I do though, eventually they get worn out and need to be replaced. Most anglers just use a standard albright knot or nail knot to fix this. It works perfectly fine, but I prefer instead to tie my own fly line loops with a fly tying bobbin and thread. Done correctly, it will provide a stronger connection to your leader than the manufacturers welded loops or knots you tie (this is important when fly fishing for big game species). The bright thread that you tie the loop with also works really well as a spotter. It comes in real handy when you’re fly fishing and you have conditions where it’s hard to keep track of your fly in the water. That bright spot on the end of your fly line provides a quick reference that your fly is a leaders length away. Below are step-by-step instructions for tying your own fly line loops.

Materials Needed for the DIY fly line loop

DSC_8072

Photos By Louis Cahill

Pair of Scissors 
Bobbin with Flourescent 140 Ultra Thread
Loctite Super Glue (Optional)
Clear Cure Goo UV Light (Can be eliminated if you use Loons UV Knot Sense)
Clear Cure Goo Hydro (Can be eliminated if you use Loons UV Knot Sense)

Step 1: Cut fly line at a 45 degree angle

DSC_8067

You’ll want to make sure you make a clean 45 degree cut on your fly line before you start. This will allow you to wrap the thread and fly line, finishing with a nice tapered end.

Step 2: Fold over the fly line and secure it down with thread wraps.

DSC_8113

Start wrapping your thread at the loop and work your way back slowly until you’ve covered the 45 degree cut fly line all the way. Then, work it all the way back up to the loop. Be precise with your wraps, making them neat. Doing so, you won’t have to build everything up so bulky and use so much thread wraps.

Step 3: Whip finish to secure thread and cut with scissors.

DSC_8119

Whip finish the thread a couple times and cut the thread. Pack and use a whip finish tool if you need one to tie this knot.

Step 4: Brush on a thin coat of Super Glue

DSC_8126

This step is probably overkill but I’m a man that believes in redundancy. I don’t have a problem waiting ten seconds for the glue to dry so I have two layers of protection and strength.

Step 5: Coat thread with Clear Cure Goo UV Hydro

DSC_8145

Brush on a thin and even coat of Clear Cure Goo UV Hydro to the threaded area. Remember, you can always add a second coat if you need to, so don’t get messy here.

Step 6: Use UV Light to Cure Everything

DSC_8159

The UV light is a must if you’re doing this indoors or on really cloudy days. I carry it with me most of the time, simply because if I don’t have it, that’s when I’ll need it. Fifteen seconds with the UV light and everything should set up a nice and you’ll have yourself a super strong fly line loop.

Keep it Reel,

Kent Klewein
Gink & Gasoline
www.ginkandgasoline.com
hookups@ginkandgasoline.com
 https://www.ginkandgasoline.com/hosted-trips/
Sign Up For Our Weekly Newsletter!
 

Follow Gink & Gasoline on Facebook:

6 thoughts on “Sunday Classic / DIY Fly Line Loop with Step-by-Step Instructions

  1. Now that CCG is out of business, what UV Cement do you recommend as a suitable replacement and you prefer not to use Loon Knot Sense?

  2. I had a bluefish eat a bright thread loop between my shooting head
    and running line last fall on the beach. That yellow eyed demon
    bit off a 30′ head… GONE

    I’m sticking with black

  3. At my shop in the 90s we used to use the double nail knot to make loops and I tested it with a connection to double lined40 lb. mono. The fly line broke before the knot every time. That being said, a whipped loop is more streamlined than the double nail knot. I think if I ever get concerned about a welded loop breaking I ‘ll probably just tie a double nail knot over the weld!!

  4. Pingback: WEEKLY PRESS – DIY Fly Line Loop | Gink and Gasoline Fly Fishing Blog | The James River Mermaid

Leave a Reply to jon holsenbeck Cancel reply

Your email address will not be published.

Captcha loading...