4 Tips to Get You Roll Casting Like a Pro

12 comments / Posted on / by

how-to-rollcast

4 Tips for Improving your Roll Cast. Photo By Louis Cahill

You’ve just spotted a big head break the surface on the far bank, gulping down a struggling mayfly drifting in the foam. The excitement of discovering the trophy trout feeding triggers your body’s adrenaline glands, and almost instantly, you feel your heart begin to pound, thump thump….thump thump. With the confined quarters and lacking room for a back cast, you realize your only viable option to reach the fish is going to be with an accurate roll cast. As you quickly try to present your mayfly imitation in the feeding lane, hoping that the big fish will mistake it for a natural, your fly shoots left of your intended target and lands in an overhanging branch above the fish’s lie, immediately putting down the big fish. With the fishing opportunity blown and the disappointment setting in, you find yourself asking, “What did I do wrong?”

As an avid small stream trout fisherman, I’ve lived out this exact situation many times, and felt the disappointment followed by a poorly executed roll cast. It wasn’t until I took the time to understand and learn the mechanics of proper roll casting, that I began finding myself capitalizing on fishing situations that called for precise roll casting. Looking back now on my past roll casting insufficiency, it’s clear I wasn’t at all, alone. There’s many anglers that struggle with roll casting, and that’s why I’ve decided to provide a short list of tips that’s intended to get anglers roll casting like pros.

4 Tips to get you roll casting like a professional

Tip 1. Smoothly skate or ski your fly across the surface of the water all the way to your anchor point.

The key to a good roll cast, first starts by always staying in complete control of your fly line, leader and fly throughout your entire roll cast. Always make sure your fly stays on the waters surface and moves steadily in a straight line all the way to your anchor point. This will help you create a nice D-loop and will provide sufficient fly line to grab tension on the water’s surface so you can adequately load (bend) your rod and generate the line speed needed during your roll cast.

Tip 2. Anglers roll casting should always anchor their flies as close to their left/right side as possible.

One of the most common mistakes I see anglers making in their roll casting is not bringing their flies back to their body (side) close enough before they begin their forward cast. This is equally important whether you’re making a roll cast on your dominant side or an off-shoulder roll cast on your non-dominant side. Not doing so, you’ll drastically be hindering your accuracy and you won’t create a big enough D-loop capable of adaquately loading your fly rod. If you’re anchor point is too far from your side when you begin your forward cast, your presentation will be pushed significantly to the right or left of your intended target every time. Warning: If your anchor point in front of you instead of off to your side, you may end up hooking yourself when the fly leaves its anchor point.

Tip 3. Once your fly reaches your anchor point your rod needs to come to a complete stop.

Another catastrophic mistake anglers make roll casting is they don’t come to a complete stop when the fly reaches their anchor point. Failing to do this, will not allow your fly line to grab tension on the water’s surface, and you won’t be able to load your rod sufficiently. Be careful though, if you’re fishing weighted flies and pause too long, they’ll sink too deep and you won’t be able to pull the flies to the surface during your forward cast. This usually results in a collapsed roll cast that doesn’t reach your target.

Tip 4. Smoothly Accelerate Your Rod and Don’t Drop Your Rod Tip to the Water

In roll casting, it’s important to remember that you only have a forward cast to make your cast. Since you don’t have the luxury of a strong back cast when you’re roll casting, you need to make sure you’re forward cast has good form and is efficient. Concentrate on smoothly accelerating your rod in a straight line path, and abruptly stopping your rod at it’s fastest point in the 2 o’clock position. This will put maximum bend in your rod and provide you the power needed to pull off a powerful roll cast that straightens out the leader and is accurate.  If you finish your roll cast with your rod tip too close to the water’s surface, you’ve probably moved your rod tip in a convex path instead of a straight line path. This will open your casting loop, decrease line speed, and your fly line and leader usually will pile up short of your target.

Roll Casting is a casting technique every fly angler should become well versed. Photo By: Louis Cahill

I hope everyone finds these roll casting tips helpful. Please feel free to share with anyone you think would benefit from the information. Keep it Reel,

Kent Klewein
Gink & Gasoline
www.ginkandgasoline.com
hookups@ginkandgasoline.com
 
Sign Up For Our Weekly Newsletter!
 

Follow Gink & Gasoline on Facebook:

12 thoughts on “4 Tips to Get You Roll Casting Like a Pro

  1. Let me preface this comment with the fact that I have no clue what I’m talking about when it comes to photography so this is very much a visceral response – the photography on your website is outstanding. The rainbow release picture that was so intimately captured in this post is a testament to my belief. Keep up the great work guys.

  2. Please tell me what and where is the anchor point. This question was on the CCI performance test and the answer that we gave was said to be wrong.

    • David,

      It really depends on where the flies intended target is going to be. Is it an anchor for a regular roll cast or an off shoulder roll cast?

      The main point is to have the fly anchored close to either side thereby creating a sufficient D-loop in the fly line so you can make a sufficient roll cast to your target.

      Hopefully this helps.

      Kent

        • David,

          May I suggest you contact a MCCI. Look up Peter Lami based out of GA. You can find him if you google. He knows the test questions stuff forwards and backwards and is usually very helpful to students trying to get CCI certification. I’ll be happy to give you my full explanation on this, but what I think is correct, doesn’t always sit well with the FFF judges.

          Kent

          • David,

            I used to have his number but I got a new phone and my numbers weren’t transferred over. Hence I don’t have his contact anymore. I will check to see if I have his email address still and get back to you.

            Let me ask you this one question though. Can you not get on the FFF site and email someone that can provide you this answer. As long as they are not your judge the day of test its supposed to be legal.

            Kent

          • I emailed the FFF today to try to get his contact infomation.
            Thanks for your help.

  3. Pingback: Fly Casting Tips - How To Roll Cast -

Leave a Reply to David Drez, Jr. Cancel reply

Your email address will not be published. Required fields are marked *